Get configuration & price

Fuel level monitoring

Eurosens DominatorFuel level sensors

Accurate fuel level and volume monitoring — wired or Bluetooth. For vehicles, machinery, fuel tanks and stationary installations.

  • ±1% accuracy
  • −40…+85 °C
  • IP67
  • Wired + Bluetooth BLE
Wired · Tank → Dominator → GPS tracker
Bluetooth · Tank → Dominator BT ⇢ BLE ⇢ tracker
Eurosens Dominator wired and Bluetooth capacitive fuel level sensors side by side
WiredBluetooth

One sensor platform

Wired or wireless?

Same measuring platform, two installation philosophies. Pick the branch that matches your tank, vehicle and tracker.

Wired Dominator

For permanent installations with direct connection to a GPS/GLONASS tracker, display or control system.

  • RS485 / RS232
  • CAN J1939
  • Analog / Frequency
  • LLS / MODBUS

Dominator BT

Autonomous fuel level sensor with Bluetooth Low Energy. No signal cable routing between the sensor and receiver.

  • Bluetooth BLE
  • Built-in battery
  • Up to 200 m*
  • Smartphone configuration

* Direct line of sight.

Why Dominator

Built to be installed, serviced and reused

01

Modular design

Cut it. Extend it. Reuse it.

02

Bayonet mounting

Fast removal without dismantling the tank mount.

03

Fuel volume inside the sensor

Level in — liters out.

04

Temperature compensation

Stable measurements from −40 to +85 °C.

05

Fuel theft detection

Fuel drain detection and alarm output.

06

Built for vehicles

Automotive connector. IP67. Self-diagnostics.

Close-up of the bayonet tank mount used by Eurosens Dominator sensors
Tank → mount → sensor → turn → lock. Remove the sensor for service or verification without touching the tank mount.

Which Dominator do I need?

Start from your tracker input, not from a model name

Recommended

Select your tracker input

Not sure? Send us your tracker model — we'll check compatibility.

Eurosens Dominator Wired

One sensor platform for virtually any common telematics interface

ModelMain interfacesConfiguration / note
AFAnalog / FrequencyConfiguration: K-Line
RSRS485 / RS232; Frequency / discreteConfiguration: K-Line
RS485RS485Configuration via RS485
CANCAN; Frequency / discreteConfiguration: K-Line
AFRSRS485 / RS232; Analog / frequency / discreteMulti-interface
RSCANRS485; CAN; Frequency / discreteMulti-interface

Supply

10–50 V*

Accuracy

±1%

Temperature

−40…+85 °C

Protection

IP67

Reverse polarity protection

Yes

* Electrical parameters and interface availability depend on the modification — confirm against the datasheet of the selected version.

Dominator BT

No sensor cable. No complicated cable routing.

Eurosens Dominator BT — autonomous wireless fuel level monitoring over Bluetooth Low Energy.

TankDominator BT⇢ BLE ⇢GPS tracker / BT-COMmonitoring platform

Accuracy

±1%

BLE range

up to 200 m*

Designed battery operating time

5 years**

Operating temperature

−40…+85 °C

Protection

IP67

* Direct line of sight. ** Designed battery operating time; not a warranty period.

Where wireless makes sense

Trailer

No cable between tractor and trailer.

Hard-to-reach tank

No long sensor cable routing.

Stationary tank

Wireless transmission to a nearby receiver.

High cable damage risk

No external sensor signal cable to cut or damage.

What you actually monitor

From a level reading to fuel you can account for

  • Fuel level
  • Fuel volume
  • Refueling events
  • Fuel drains
  • Real fuel consumption analysis

Fuel graph · refuel & drain

● Refueling● Fuel drain

Applications

Where Dominator is installed

Construction machinery and a stationary diesel tank monitored with fuel level sensors
  • Trucks & buses
  • Construction & agricultural machinery
  • Tankers & trailers
  • Diesel generators
  • Stationary fuel tanks

Installation

Four steps on the vehicle

  1. 01Measure tank depth
  2. 02Cut or extend the electrodes
  3. 03Install the bayonet mount
  4. 04Connect and configure
  5. Dominator BT: configure from your smartphone. Full instructions are in the downloadable manual.
Technician installing a fuel level sensor on a truck fuel tank

Tank calibration

Tank calibration doesn't always mean filling the tank step by step

Measured filling / draining

Build the height-volume table from controlled portions.

Tank geometry

Calculate the table from tank shape and dimensions.

Import an existing table

Reuse a height-volume table you already have.

Compatibility

Designed for integration with GPS tracking and control systems

  • RS485
  • LLS
  • MODBUS RTU
  • RS232
  • CAN J1939
  • Analog
  • Frequency
  • Bluetooth BLE

Tell us your tracker model

Trust

Certified for professional installations

E-mark
ТР ТС 020/2011
Type approval — Belarus
Type approval — Russia
Type approval — Kazakhstan
Explosion-proof versions available

Manufacturer

Developed and manufactured by Mechatronics

Eurosens equipment is supplied to telematics providers in 90+ countries.

FAQ

Questions from integrators and fleets

Final step

Get the right Dominator configuration and price

Tell us the vehicle, the tracker and the tank — we come back with a configuration, lead time and price.

Our engineers can also check compatibility with your GPS tracker.

01 · Application02 · Contact
Application
Connection